Full Tutorial Flash Samsung Using ODIN From Computers

These are the directions to streak Samsung Stock ROM/original firmware utilizing Odin on Windows Computer.

Prerequisites: Your Samsung Smartphone ought to have no less than 30-40 percent of telephone battery to play out the blazing procedure.

Streak Samsung Stock Rom utilizing Odin

Stage 1: after odin and the driver is installed, go to the next tutorial.

Stage 2: make sure the file as shown below

Stage 3: Shutdown your Samsung Device.

Stage 4: Now, you need to boot into Download mode. To boot into Download Mode: Press and hold “Volume Down + Home Key + Power Key”. At the point when telephone vibrates Leave the “Power Key” yet Keep holding the “Volume Down” and “Home key”. You will boot into the “Download Mode”.

Stage 5: In the Download mode you will have the capacity to see a Warning Yellow Triangle Sign. In this circumstance you need to press the “Volume up” key to proceed.

Stage 6: Download and concentrate Odin on your PC. Subsequent to separating you will have the capacity to see the accompanying documents:

Stage 7: Now, Open “Odin3” and connect your phone to the PC.

Stage 8: Once you have associated the telephone to the PC, Odin will naturally perceive the gadget and show “Added” message at the lower-left board.

Stage 9: Once your gadget recognized by Odin, tap on the “PDA” catch and select the “tar.md5” file that you have separated in Step (2)

Stage 10: Now, tap on the “Start” catch in Odin to start the Flashing procedure.

Stage 11: Once you see, the Green Pass Message then expel the USB link from the gadget (amid this procedure, your gadget will restart consequently).

Stage 12: Your Samsung Device will now stuck at (boot loop). Presently, You need to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. At the point when telephone vibrates Leave the Power Key yet Keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.

 

Stage 13: In “Recovery Mode”, “Wipe Data/factory reset” 

Step 14: Once Cache Data is cleared, Select “Reboot System Now” from the recovery menu.

Stage 15: Now, your Samsung Device will restart with no issue with the Stock Rom you have downloaded.

Notes :

[*] Data Loss Process: Flashing Stock ROM is dependably an information misfortune methodology. In this way, dependably take reinforcement of your own information before blazing the Stock ROM.

[*] Flashing Stock ROM or Downgrading Stock ROM does not void your Phone guarantee. In this way, dont worry about the gadget guarantee.

[*] Samsung Stock Firmware: If you are searching for the first firmware for your gadget at that point make a beeline for Download Samsung Stock Firmware for all gadgets page.

[*] Samsung USB Driver: If you are searching for the first USB Driver for your gadget at that point make a beeline for Download Samsung USB Driver for all gadgets page.